- small and large spikes (screw on)
- marking pencil
- measuring tape
1. Measure the circumference of the hat.
2. Divide the measurement by how many spikes you have. I had 24 spikes, and the circumference was 24", so I spaced them 1" apart. Use your pencil, and mark dots that are 1" apart. Then, poke holes at each dot, using an awl.
3. Screw on the spikes at each hole. I alternated small and large spikes to resemble my inspiration.
Also, the lovely folks at M&J Trimming are offering a 15% off spikes code to my readers.
And thank you to Wasteland for partnering on this DIY!!!